Our pure sine wave inverters offer a steady, continuous wave that provides a smooth running of all equipment designed to work on a pure sine wave.
The GPSW-KEMA Power Inverters GPSW-II 1-6KW are 2 in 1 low frequency power inverters with 30A maximum adjustable charger. They also have smart fans and alarms that provide a comprehensive protection for overload, short-circuit, and low battery. These inverters also have selectable grid power priority, solar power priority or power saver modes that auto-transfer from one mode to another in 10 milliseconds. They also have Rs232 / SNMP communication optional.
The ZYSW-KEMA Power Inverters 600VA-1500VA are 3 in 1 smart low frequency power inverters with grid chargers of 50A maximum current and PWM solar charge controllers. They also have a selectable grid power priority or solar power priority with auto-transfer time of 10 milliseconds, selectable charge voltage and current to extend battery life, and selectable 145-270V or 100-290V grid input range. These inverters have smart cooling fans, and a comprehensive protection for overload, short-circuit, and battery Low.
Our hybrid inverters are multi-mode inverters that simultaneously manage inputs from both solar panels and a battery bank, charging batteries with either solar panels or the electricity grid.
The SPG-KEMA Power Inverters SPGIII 0.5-6KW are 3 in 1 low frequency toroidal transformer power inverters with grid chargers and maximum 150VDC MPPT charge controllers. These inverters also have selectable grid power priority, solar power priority or power saver modes that auto-transfer from one mode to another in 10 milliseconds. They also contain a pure sine wave output that can adapt to various types of loads, and an adjustable charge current suitable for a particular battery type. These inverters have smart, safe and reliable fans, and a comprehensive protection for overload, short-circuit, and battery Low. They also have a USB/WIFI/Sim Card communication option.
The Steca Solarix PLI inverters offer an all-in-one package. It allows users to supply consumers with 230 V AC power, charges the battery with an integrated MPPT charge controller, and at the same time permits connection to a generator or an available electricity grid.
This means that solar energy can be used as the top priority, for example. And if that is not enough, a generator can be started, or the supply can be switched to the public grid. At the same time, the battery can also be recharged by either the generator or the grid. Given its very quick switchover time of up to 10 milliseconds and its flexible energy priority selection, the Steca Solarix PLI also acts as an uninterruptible power supply.
Even difficult consumers, such as large AC motors, can be started reliably with dual overload capacity. The maximum power point tracker in the integrated charge controller ensures that, even in unfavourable lighting conditions, the maximum output is obtained from the PV modules to optimally charge the battery and supply the consumers with power at the same time.
The OutBack Power Inverters FXR/VFXR A-Series are available in power ranges from 2000 to 3600W, multiple units may be stacked and connected with other OutBack Power electronics for seamless system integration and the ability to function in a wide variety of applications, and system sizes. Up to nine inverters can be combined in a 3-phase system with the 12V, 24V or 48V models, and up to 36kW in a grid-tied 24V or 48V system. The exclusive modular system architecture means that increased power output is just an additional FXR inverter/charger away. FXR inverter/chargers can be paired with a MATE3s to add OPTICS RE to monitor and control system performance from any location. Available in sealed or vented units with NEMA type 1 diecast aluminium chassis, FXR inverter/ chargers are designed to operate in the harshest environmental conditions such as high temperatures, humidity, or corrosive salt air. FXR inverter/chargers provide absolute dependability in mission critical installations no matter how harsh or challenging the conditions.
Our off-grid inverters act as miniature power grid to supply energy to AC loads by drawing the battery bank storage.
The Victron Quattro Inverters can be connected to two independent AC sources, for example the public grid and a generator, or two generators. The Quattro will automatically connect to the active source.
Each Victron Quattro Inverter has two AC Outputs, and the main output takes less than 20 milliseconds to supply the connected loads in the event of a grid failure or when shore/generator power is disconnected. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, like a water heater for example, can be connected to this output.
Three units of Victron Quattro Inverters can be configured for three phase outputs. Four sets of three 15kVA units can be parallel connected to provide 144kW / 180kVA inverter power and 2400A charging capacity.
In cases where there’s limited generator, shore side or grid power, the Quattro is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (16A per 5kVA Quattro at 230VAC). A current limit can be set on each AC input. The Quattro will then take account of other AC loads and use whatever is spare for charging, thus preventing the generator or mains supply from being overloaded.
Where Boosting shore or generator power is necessary, the Power Assist feature takes the principle of Power Control to a further dimension allowing the Quattro to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the Quattro will make sure that insufficient mains or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.
The SMA Sunny Boy 3.0 – 5.0 inverters have integrated SMA Smart Connected services, that offer all-round comfort for PV system operators and installers. The automatic inverter monitoring by SMA analyses operation, reports irregularities and thus minimizes downtime. Current communication standards such as intelligent energy management solutions as well as SMA storage solutions can be flexibly added to the inverter at any time.
Our grid-tied inverters take in direct current power from the source and inverts into alternating current power so that it can provide electricity using grid utility. These inverters are mainly used between local electrical power generators: solar panels, wind turbines, hydro-electric, and the grid.